ACON Mission 3-in-1 Control Solution - Swiss Point Of Care
Acon Mission 3-in-1 Control Solution
The ACON Mission 3-in-1 Control Solution is used to check whether the ACON Mission 3-in-1 Cholesterol Meter and test strips function properly.
The content of the ACON Mission 3-in-1 Control Solution consists of several bottles each containing a different cholesterol or glycerol content:
- CHOL control solution 1: contains less than 0.2% cholesterol
- CHOL control solution 2: contains less than 0.4% cholesterol
- HDL / TRIG Control Solution 1: contains less than 0.06% cholesterol and 0.2% glycerol
- HDL / TRIG Control Solution 2: contains less than 0.1% cholesterol and 0.4% glycerol
Specifications ACON Mission 3-in-1 Control Solution - Swiss Point Of Care
SKU | FS524 |
---|---|
Brand | Swiss Point Of Care |
Accessory Group | Control Solution |
Acon Mission 3-in-1 Control Solution
The effectiveness of cholesterol tests can be checked using the Mission Cholesterol Monitor System. For this the ACON Mission 3-in-1 Control Solution is used.
One control solution contains total cholesterol and the other control fluid high-density lipoprotein (HDL) and triglycerides (TRIG). If the liquid is applied to a test strip, it can then be read on the cholesterol meter display whether the meter and test dot are functioning correctly.
The ACON Mission 3-in-1 Control Solution is easy to handle and therefore suitable for both professional use and home use. After opening, a small bottle of control solution can be kept for a maximum of 4 months, after which no active ingredient is present. A prerequisite for this is that the control solution is stored at a temperature between 2 and 30 degrees Celsius and the test materials must have a temperature between 20 and 40 degrees.